2013+ BRZ

Stage 1

Looking to maximize horsepower on your factory engine, a turbo upgrade is the best Dollar to HP gained modification you can do for your FRS/BRZ. The SBD Turbo Kit will safely allow you to add 100+ HP on the 100% factory fuel system and clutch/transmission. On 91/93 octane @ 10 PSI, you can expect 280-300whp depending on exhaust modifications elected. On E85 Ethanol, power levels over 400whp are capable with upgraded fuel modifications.

 

Stage 1 Turbo:

  • Mitsubishi 20G Spec CHRA with 6+6 Billet Compressor Wheel Upgrade

  • SBD 9-Blade Lightweight Hi-Flow Custom Turbine Wheel

  • Journal Bearing, Oil Cooled

  • Internally Wastegated with 0.7 Bar (10 PSI) Spring

  • 52.5mm IND/68mm EXD Compressor Wheel

  • 49.2mm/55.8mm TD05H Turbine Wheel with 8cm Housing

  • New OEM Pre-Welded Oil Pan w/ Return Line Fitting

  • 400-425whp Capable on E85 Ethanol

 

Kit Features:

You must have an Ecutek or Open Flash Tablet to tune your vehicle when purchasing this kit. If you do not already have one of the two options, you’ll need to purchase one with your turbo kit.

  • Omni 3-Bar Map Sensor (Included)

  • Hi-Temperature Turbo Blanket (Included)

  • TurboSmart RacePort 50mm Blow-Off Valve in your Choice: Anodized Blue or Black (Included)

  • 4-Ply Silicone Hose in your Choice: Blue or Black (Included)

  • Tig Welded Stainless Steel Turbo Manifold and Exhaust Piping

  • Mandrel Bent Aluminum Intercooler and Intake Piping

 

Additional Options:

  • Custom OFT E-Tune by Shiv Pathak ($245)

  • Open Flash Tablet Programmer ($500)

  • Drift Armor Crash Bar ($150)

  • SBD 2.5″ Catless Overpipe/ Front Pipe Combo ($400)

  • Exedy Stage 2 Clutch ($550)

  • Ecutek Tuning Cable + License ($600)

  • ProDrive 3-Port Boost Controller w/ Plug-N-Play Harness ($100)

Buy Now:

Stage 1 Performance Package | Please Call 281.925.7575

Stage 2

Looking to maximize horsepower on your factory engine, a turbo upgrade is the best Dollar to HP gained modification you can do for your FRS/BRZ. The SBD Turbo Kit will safely allow you to add 125+ HP on the 100% factory fuel system.

An upgraded clutch is mandatory for the manual transmission cars. The factory automatic transmission is 100% okay.

 

On 91/93 octane @ 10 PSI, you can expect 300-325whp depending on exhaust modifications elected.

On E85 Ethanol, power levels up to 400whp are capable with upgraded fuel modifications on the 100% factory engine.

On E85 Ethanol, power levels up to 500whp are capable with upgraded fuel modifications on a built engine.

 

Stage 2 Turbo:

  • Custom Ball-Bearing 58mm Inducer Billet Compressor Wheel CHRA

  • Ball-Bearing, Oil & Water Cooled

  • Internally Wastegated with 0.7 Bar (10 PSI) Spring

  • 58mm IND/76mm EXD Compressor Wheel

  • 60mm Turbine Wheel

  • Power levels up to 400whp are Capable with a Stock Motor + E85 Ethanol

  • Power levels up to 500whp are Capable with a Built Motor + E85 Ethanol

 

Kit Features:

You must have an Ecutek or Open Flash Tablet to tune your vehicle when purchasing this kit. If you do not already have one of the two options, you’ll need to purchase one with your turbo kit.

  • Omni 3-Bar Map Sensor (Included)

  • Hi-Temperature Turbo Blanket (Included)

  • TurboSmart Raceport 50mm Blow-Off Valve in your Choice: Anodized Blue or Black (Included)

  • 4-Ply Silicone Hose in your Choice: Blue or Black (Included)

  • Tig Welded Stainless Steel Turbo Manifold and Exhaust Piping

  • Mandrel Bent Aluminum Intercooler and Intake Piping

Buy Now:

Stage 2 Performance Package | Please Call 281.925.7575

Follow

  • facebook
  • googlePlaces
  • instagram
  • Black YouTube Icon

Contact

281.925.7575

Address

10619 Tower Oaks Blvd, Houston, TX 77070, USA

© 2017 Speed Logic Inc.